Why does my HP Laserjet keep jamming?

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.

Why is my printer jamming all the time?

If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.

How do I fix the paper jam on my HP Laserjet p2015?

Unplug the power cord when the printer is on and leave it unplugged for 10 Seconds. Turn the printer back on. If the light is still on then there may be a paper jam sensor that has stuck paper in it.

How do I stop my printer from jamming the paper?

Jam session

Make sure your device’s paper is correctly loaded into the slot or tray.
When you reload your input tray, pay attention to the tray’s needs.
If your device has a paper tray, do not overload it.
Use only one kind of paper at a time in your input tray.
Fan the stack of paper that you’re about to load.

How do you get jammed paper out of a printer?

Remove the paper following the procedure below.

Turn off the printer, and unplug the power cord of the printer from the power supply.
Remove the Cassette.
Set the printer upright with the left side down.
Slowly pull the jammed paper out so that the paper does not tear.
Align the paper, then reload it in the Cassette.

What are two probable causes for printer paper jams?

So here are the most common causes:

Paper inserted incorrectly. This tends to be the number one cause, and there’s a lot that can go wrong while you’re loading the paper in the input tray.
Damaged rollers. Rollers pull in sheets from the input tray.
Low quality paper.
Low quality cartridges.

How do I clean my HP Laserjet pickup roller?

Clean the pickup roller

Unplug the power cord from the product, and then remove the pickup roller.
Dab a lint-free cloth in isopropyl alcohol (or water), and then scrub the roller.
Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.