What kind of torch is best for jewelry making?

ACETYLENE/AIR TORCH This is a super common torch used for jewelry making that consists of a single tank (acetylene b tank) filled with acetylene gas that mixes with air at the torch head.

What torch do you use for soldering?

3) Mapp Gas Torches Mapp gas torches can be used to solder and sweat copper, braze copper and brass and offer the convenience of a single tank system with the advantage of higher working temperatures. Work will proceed faster because the metal is heating faster.

What kind of torch Do I need to melt silver?

You’ll need a brick and a blowtorch. A kitchen blowtorch will be enough if you want to melt small pieces of jewelry. Otherwise it’s necessary to use a conventional torch such as those sold in DIY stores. We use butane to refill the torch (sold in supermarkets refills for lighters or torches).

What kind of torch will melt gold?

propane torch
Because gold has a moderately low melting point for a metal, it can be melted with a standard propane torch. Once melted, gold can be poured into molds to harden or pounded with a mallet into thin strips.

Is propane good for soldering?

Torch. The torch needed for soldering copper can be propane or MAPP gas (methylacetylene-propadiene propane). Propane works fine, it just takes longer—which may work to your advantage if you are new to soldering copper and are working on 3/4-inch or 1/2-inch pipe. The choice of a torch is really up to you.

Can you use a torch to solder?

solder the joint While wearing safety glasses, fire up the propane torch. All three parts of the flame should be blue; if the flame is orange, turn gas down. Hold the flame on the tip of pipe to heat. If done correctly, the solder will be drawn into the joint.

Does MAPP gas melt silver?

There’s no need to go over to MAPP for melting small amounts of silver – air/propane is more than enough, although boxing in the heat is a worthwhile move.

Do you have to use borax when melting silver?

Borax is also used mixed with water as a flux when soldering jewelry metals such as gold or silver. Also used to glaze crucibles and casting process. You will need to glaze your crucible with borax before you melt any metal in it. This ensures that your metal doesn’t stick to the ceramic crucible.

Is a butane torch hot enough to silver solder?

Be sure to get some flux, and be sure it’s specifically for use with silver solder. An ordinary household propane or butane torch will work, but even better is one of the new torches that burn MAPP gas. They burn much hotter than ordinary torches, which makes silver soldering go faster and easier.