What is Wye strainer?
Y (Wye) strainers mechanically remove solids from flowing steam, gases or liquid piping systems with the use of a perforated or wire mesh straining screen, and are used to protect equipment.
Is a wye strainer a check valve?
A check valve (non-return valve) is used to control the direction of flow of water. They prevent the unwanted backflow of water through pipes in pumping applications. Y strainers provides the mechanical removal of particles and debris for from liquid, gas or steam lines by means of a mesh or wire.
Can a wye strainer be installed vertically?
Steps for Installing Your Y Strainer in a Vertical Position Step 1: Install the blowdown valve (if necessary) at the blow-off connection. Step 2: To ensure maximum efficiency, install a pressure gauge at the inlet and outlet.
Why is it called a wye strainer?
Wye “Y” Strainers The most common type of strainer in most piping systems is the “Wye” Strainer. The name is derived from the fact that the shape of the strainer resembles a “Y”. Also the Wye strainer has a “blow down” feature so it is not necessary to remove the mesh each time the strainer is cleaned.
What is a Wye filter?
Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.
Where do you put Wye strainer?
To provide for easier maintenance, the Y-Strainer should be located where the drain plug can be removed. Additionally, ensure the drain or blow-off is located at the lowest position when installed. If installed in the vertical position, the wye side of the strainer must be pointing downward.
How do you select the Y-strainer?
How to Select a Pipeline Strainer
- Choose the proper strainer configuration.
- Identify critical design criteria. Select the materials of construction. Determine the correct particle retention size. Choose a strainer size based upon fluid velocity and differential pressure.
- Identify installation space constraints.
What is the purpose of using strainer?
A strainer is used to protect other downstream equipment (e.g., pumps, instrumentation) from damage by rogue junk. A filter is employed to separate particles from the fluid. a technical knowledge base for all the process piping professionals around the world…
What is the function of a strainer?
Upstream Strainers for Valves and Regulators. The function of the strainer is to protect the valve or regulator from entraining dirt, scale or other solid substances carried in the process liquid, gas or vapor.
What is a strainer used for?
Y-Strainer Guide for Selection and Use – Part 1. Y-Strainers are devices for mechanically removing solids from flowing liquids or gases by means of a perforated or wire mesh straining element. They are used in pipelines to protect equipment such as pumps, meters, control valves, steam traps and regulators.
What are Y-type strainers?
Introduction to Strainer in Piping Y-Type Strainer. In Y-type strainer the filter leg connects to the main pipe at a diagonal angle, giving the strainer its “y” shape, and hence its name. T-Type or Basket Type Strainer. Material of Construction. Temporary Strainer. Filters vs Strainers.
