What is Talas on Fox forks?
TALAS stands for Travel Adjustable Linear Air Spring, and while the name remains, the spring curve is not linear. Fox engineers developed an entirely new adjustable-travel air spring that closely resembles those used in Float forks. The difference in travel remains 30mm—changing from 130mm to 120mm in the low setting.
How much is a SAG Fox 34?
Sag should be set to 15 – 20% of total fork travel To achieve the best performance from your FOX suspension, adjust the air pressure to attain your proper sag setting. Sag is the amount your suspension compresses under your weight and riding gear. Sag range should be set to 15–20% of total fork travel.
What PSI is Fox 34?
34 TALAS maximum air pressure is 200 psi. The recommended settings in this tuning guide are designed to be a starting point, in order to get you out on your first ride in as few steps as possible.
How do you adjust a Fox Talas?
Turning the TALAS lever toward the “+” (clockwise) sets your fork in the long travel mode. When adjusting to long travel mode, your fork will extend once unweighted. Turning the TALAS lever toward the “-” (counter-clockwise) and compressing the fork sets your fork in short travel mode.
How does Fox Talas work?
In June, 2013 Fox introduced their new Talas system for 32, 34 and 36 forks….Social.
| Accept | |
|---|---|
| Cookie Name | _gw,_gs,_gu |
How much psi should I have in my forks?
Sag should be set to 15 – 20% of total fork travel
| Suggested Starting Points for Setting Sag | ||
|---|---|---|
| Rider Weight (lbs) | Rider Weight (kgs) | 32/34 TALAS Pressure (psi/ bar) |
| 120-130 | 54-59 | 98psi/ 6.7 bar |
| 130-140 | 59-64 | 105psi/ 7.2 bar |
| 140-150 | 64-68 | 113psi/ 7.8 bar |
What PSI should my FOX shock be?
Add air pressure to the main air chamber in ~50 psi (3.4 bar) increments, slowly cycling the shock after every 50 psi (3.4 bar) addition. Set your main air chamber to between 50-300psi to prepare to set sag as described in the “Setting Shock Air Pressure” section below.
How do I add air to my Fox 34 fork?
Setting Fork Air Pressure
- Unscrew the blue air cap on top of the left fork leg counter-clockwise to expose the Schrader valve.
- Attach a FOX High Pressure Pump to the Schrader valve.
- Pump your fork to the appropriate pressure as listed in the ‘Suggested starting points for setting sag’ table below, then remove the pump.
How much travel does a Fox 32 have?
The Fox 32 Factory fork is available in both 29″ and 650b wheels with 120mm of travel, a 15mm through-axle and a tapered steerer.
What is Fox Float Fluid?
The Fox Float fluid is a lubricant for the maintenance of the Float air chambers of Fox dampers and forks. This fully synthetic oil is engineered to reduce seal friction.
What’s new on the 2014 Talas Fork?
The excessive seal drag that plagued past TALAS forks is gone. The spring curve mimics the 2014 Float line, which is firmer than past years, providing more support to keep the fork riding higher its travel.
How do I adjust my Talas fork to long travel?
TALAS forks give you the option to switch between two travel settings while riding. Turning the TALAS lever toward the “+” (clockwise) sets your fork in the long travel mode. When adjusting to long travel mode, your fork will extend once unweighted.
What is the difference between the 34 and the performance elite Forks?
Starting at only 3.92 pounds, the 34 provides proven trail performance that instills confidence and control. Performance Elite forks retain the same adjustments, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized upper tubes instead of Genuine Kashima Coat.
Can I use a high pressure washer on my Talas Fork?
Do not use a high pressure washer on your fork. Set your TALAS travel adjuster to the long travel setting (fully clockwise). Unscrew the blue air cap on top of the left fork leg counter-clockwise to expose the schrader valve. Attach a FOX High Pressure Pump to the schrader valve.
