What is an engine room arrangement plan?

The accommodation block is usually arranged above the engine room and both of them must be very well coordinated to create one logical solution. Detailed Engine Room Arrangement with the Index of Machinery and Equipment shall be the part of the Contract Design.

What is engine room system?

On a ship, the engine room (ER) is the compartment where the machinery for marine propulsion is located. This design maximizes the cargo carrying capacity of the vessel and situates the prime mover close to the propeller, minimizing equipment cost and problems posed from long shaft lines.

What is engine room checklist?

Inspect engine and look for drips, leaks, belt dust, or fuel (or oil) streaks on engine block. Check raw water strainer and seacock. Sea water pump (is it leaking through the weep hole?) Inspect bilge pump.

What is the engine control room on a ship?

A ships’ engine control room (ECR) is of central importance to the engine department and overall vessel operation. Analysis reveals that a disconnect exists between the regulations which specify ship design criteria and those which specify seafarer training competencies and safe operational procedures.

How many immersion suits are required in the engine room?

(1) At least two immersion suits should be provided in wheel house and engine control room respectively as additional immersion suits.

How hot is the engine room?

Some parts in the engine room can reach temperatures exceeding 600 degrees Celsius. SOME ENGINE SURFACES onboard a vessel can heat up to more than 600 degrees celsius. That is, if you don’t protect them. With the right equipment, however, the engine room is a safe place to work.

How do you take over an engine room watch?

Handing over of the watch should be carried out according to the instructions provided by the chief engineer’s standing orders and company’s instructional manual. It should be done very sincerely and honestly so that the watch keeping becomes smoother and continuation of any kind of work is not affected on the ship.

How long should it take to don an immersion suit?

A: All immersion suits must be designed to be donned in less than 2 minutes – including any associated clothing or a lifejacket as required.

What is the purpose of immersion suit?

Immersion suits are designed to prevent crewmembers from death due to exposure and hypothermia. To do this, a suit must cover all the body and its extremities, except the face, with highly insulating waterproof material.

Why engine room is kept Pressurised?

The heat produced by the engines and Boiler cannot be dissipated easily as the engine room is partly submerged below the water line. We also keep the engine room positive pressure to help the turbocharger operate at maximum efficiency.

How hot does a boat engine room get?

This means that regardless of geographic location, on a 90-degree day, the maximum temperature measured at the engine air inlet should be no more than 120degrees F.

What are the duties for take over and hand over of the engine room watch?

Q. Describe the procedure for taking over an engine room watch.