What does the LV stand for in Mercon LV?
Mercon LV—the latest Ford ATF, it is factory fill in 2008 and later Fords. The LV stands for “low viscosity.” It is a fully synthetic ATF.
What is the same as Mercon LV?
Yes, you may wonder but Dexron VI is pretty the same as Mercon LV. Both the fluids are nearly identical specs.
What is Mercon LV compatible with?
Formulated to meet the demands of most modern transmissions on the road today, Advantage® Uni-Syn LV DEXRON® VI/MERCON® LV ATF is also backward compatible with older GM Dexron specifications making it the perfect premium product to streamline your transmission fluid offerings.
Is mercon ULV the same as LV?
Over the years, the original Mercon was supplanted by Mercon “V”, Mercon “SP”, Mercon LV, and Mercon ULV which is the latest fluid. Ford has upgraded the Mercon specifications over the years; the newer fluids are not always backward compatible with previous fluids.
Can I use dexron IV instead of III?
Per GM, Dexron IV is backwards compatible in Dex III applications, but not anything before.
What is the viscosity of Mercon LV?
Technical Product Data
| Property | Unit | Data |
|---|---|---|
| Viscosity at 100 °C | 5,9 | mm²/s |
| Viscosity at 40 °C | 29,2 | mm²/s |
| Viscosity Index VI | 150 | |
| Brookfield Viscosity at -40 °C | 9.010 | mPa*s |
Can I mix Mercon LV and DEXRON VI?
General Motors officially states that DEXRON®-VI approved fluids are backwards compatible with and should replace all previous generation DEXRON fluids in service. Ford Motor Company has issued a chart showing where MERCON® LV fluids apply and where they supersede previous generation MERCON fluids.
Is Mercon LV full synthetic?
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification.
Is Mercon LV the same as DEXRON VI?
KLONDIKE DEXRON®-VI / MERCON® LV Full Synthetic Automatic Transmission Fluid is an OEM approved fluid registered with General Motors for DEXRON®-VI and Ford Motor Company for MERCON® LV. This specification is fully backwards compatible and replaces all previous generation DEXRON fluids.
What type of transmission fluid for Mercon LV applications?
It’s said on the bottle that it is certified by Ford for Mercon LV applications. Later, I did some research and found two other certified products: Castrol/Transmax ATF full synthetic multi-vehicle transmission fluid available from Autozone and Silver State Dex VI / Mercon LV ATF.
What is the list price of Motorcraft Mercon LV?
Not sure what “list” your referring to. Motorcraft Mercon LV is $7.49 / qt. @ AAP and is not subject to any discount codes etc. Motorcraft Mercon LV @ AAP Link Motorcraft Mercon LV is $7.89 / qt. @ O’Reilly Motorcraft Mercon LV @ OR Link $6.02/qt with free Prime shipping.
What happens if you mix Mercon LV and Mercon SP?
So in turn you will have worst shift characteristics then you did before. NOTE: mercon LV, is not the same as mercon SP, you can not interchange them or even mix a little bit of either. There are a lot of problems being reported from such careless mixups and, ford is dragging their feet about this issue.
Is Valvoline Maxlife LV the same as Mercon LV fluid?
Valvoline Maxlife LV is not a Ford licensed Mercon LV fluid but says if you have problems with it to contact them. See the PI Sheet via this page. Is the dexron xi also a low viscosity fluid?
