What car comes with an RB30?
RB30DE (3.0L I6 NA) These rare engines were used in the Tommykaira M30 based on the R31 Skyline GTS and R32 Skyline GTSt. For the R31 M30, a modified RB20DE head was bolted onto the RB30E block. It delivered 177 kW (241 PS; 237 hp) at 7000 rpm and 294 N⋅m (217 lb⋅ft; 30.0 kg⋅m) at 4800 rpm.
Did Nissan Patrol come with RB30?
The GQ engine changes since 1988 were the introduction of the RB30, 3.0-litre petrol six in March 1990, electronic fuel injection on Ti Patrols from early 1992 and, in February 1995, the Patrol range was revamped and the RX specification was introduced.
What cars did the RB25DET come in?
Which cars came with the RB25DET?
- Nissan Skyline R33/R34 GTST.
- Nissan Stagea WC34.
- Nissan Cedric Y34.
- Nissan Gloria Y33 & Y34.
- Nissan Laurel C34 & C35.
What car did the RB28 come in?
Nissan Skyline RB28 Widebody GTST.
Is the RB25 better than the RB20?
Overall, both are reliable engines, but RB25 is better at torque and power production as well as solid transmission. But if you are starting a project car and do not have that huge amount, RB20 can really be a good engine; since it has a good gas mileage, and you don’t need upgrades for it to be that strong.
Is RB20DET or SR20DET better?
The RB20DET also makes less power and less torque out of the box in it’s most powerful configuration against our SR20DET. Being a six cylinder engine the RB20DET is longer and heavier then the SR20DET so it could be argued that the SR20DET is the better choice for a lighter and better balanced chassis.
What car did the rb20 come in?
The RB20DET was first introduced in 1986, fitted into the R31 Nissan Skyline (the GT Passage, GTS Turbo, GTS-R, GTS-R and GTS Autech variants). It went on to join it’s larger siblings (RB25DET, RB26DETT) in the R32 generation Nissan Skyline.
What engine is in a VL Commodore?
| Holden Commodore (VL) | |
|---|---|
| Engine | 2.0 L RB20E I6 (New Zealand, Indonesia) 3.0 L RB30E I6 (Australia, New Zealand) 3.0 L RB30ET I6 (Australia) 5.0 L Holden V8 engine (Australia, New Zealand) |
| Transmission | 5-speed manual 3-speed automatic 4-speed automatic |
| Dimensions | |
| Wheelbase | 2,668 mm (105.0 in) |
What year did Holden buy the RB30?
So, Holden went shopping and bought a batch of Nissan-built RB30s for the new VL Commodore (and Berlina and Calais) for 1986.
How much horsepower does a RB30E have?
A modified RB20DE head was bolted on to the RB30E block. It delivered 177 kW (240 PS/236hp) @ 7000 rpm and 294 N·m (30.0 kgf·m/216.9 lb.ft) @ 4800 rpm. Nissan did not produce this engine. It refers to a turbocharged engine using an RB30E short block with the twin-cam head installed from another RB series engine.
What is the difference between the RB30 and the RB26DETT?
As a reference point the RB30’s SOHC head cc’s up around the 55 to 58cc mark. The RB26DETT head from the R32/33 GTR bolts only requires a modification to the head stud holes. The RB26DETT runs larger studs. All water/oil galleys line up. The R32 RB25DE head bolts straight up to the RB30E bottom end.
What size oil restrictor do I need for my RB30?
This is more of a problem in the rb30’s that run twin cam oil pumps, Tomei have 1mm and 1.5mm restrictors available. Its highly recommended to run 2 x 1mm oil restrictors in your RB30 if using the RB25 head or 1 x 1.5mm restrictor if using the RB26 head.
