What are the dimensions of a 463L pallet?
108″ W x 88″ L
HCU 463L Air Cargo Pallet (HCU-6/E) Specs & Capabilities: Dimensions: 108″ W x 88″ L x 2-1/4″ H. Tare Weight: 290 lbs. Capacity: 10,000 lbs.
How many 463L pallets fit on a kc10?
27 463L pallets
The KC-10 uses a rounded cargo compartment to maximize cargo-carrying capability. It can accommodate up to 27 463L pallets. Normally, a maximum of 25 pallet positions will be authorized. Usable surface dimensions of a pallet are 104 inches long by 84 inches wide.
How many wooden pallets fit on a 463L pallet?
13
Pallet cargo dimensions will not exceed 86 inches wide, 84 inches long, and 76 inches high. This provides access to the latrine, cargo loading aids stowed in the cargo door, and to the aft escape exit hatch on the aft end of the cargo ramp. The C-141 can accommodate up to (13) 463L pallets.
What does 463L stand for?
In the 1950s, the U.S. Air Force used a standard designation system for all awarded projects. The “SS” represents Support System, the “463” represents an assigned general system category, 400–499 series for “Support Systems”, and the suffix “L” also represents “Support Systems”.
How much does a 463L pallet cost?
“The 463L pallet and net system cost $1,700 per set and the (proposed) cost of the AIP system is $400,” Blackford said. “This equates to a $1.3 million cost avoidance per 1,000 pallets sent to the theater.
How many pallet nets make a set?
Three nets make up a set. Two side nets are attached to the rings on the pallets and go around the sides of the load, and a top net goes over the top of the cargo. (1) The top net is attached to the side nets by hooks and rings.
How long is a 60k Tunner?
Length: 49.3 ft. Deck Height (variable): 39 in. to 18.5 ft. Turning Diameter: 98 ft.
How much can a 60k loader lift?
The new 60k Tunner loader has a total loading capacity of 60,000 pounds.
How high can a 60k loader go?
The 60k Tunner is Yokota’s largest K-loader, vehicles designed to load and offload aircraft cargo. The 60k Tunners utilize hydraulics to adjust the height of the loading platform, up to 18.5 feet, and can support up to 60,000 pounds. Dennis drives and operates all of the 730 AMS K-loader models.
