How high should an eyewash station be mounted?
between 33 and 45 inches
Eyewash stations target just the eyes and therefore have a lower flow requirement. ANSI Z358. 1 recommends a flow of 0.4 gpm also at 30 psi. The nozzles should be at least six inches from any obstruction and mounted between 33 and 45 inches above the floor.
What is the Cal OSHA requirement for eyewash stations?
Answer: Both CalOSHA and FedOSHA require eyewash and shower stations in “all work areas where, during routine operations or foreseeable emergencies” an employee’s eye or body “may come in contact with a substance which is corrosive or severely irritating to the skin” [Title 8 CCR §5162(a) and (b)].
Where should eye wash stations be located?
Eyewash safety stations must be installed within 10 seconds or 55 feet from the hazard. The spray pattern must measure between 33”–53” from the floor the user will stand on (section 5.4.
Is a plumbed eyewash station is portable?
Plumbed stations are permanently connected to a source of potable water, whereas portable stations are self-contained gravity-fed units with their own flushing fluid that must be replaced after each use. Eyewash fluid must irrigate and flush both eyes simultaneously.
Do I need an eyewash station at work?
In general, facilities are required to have an eyewash station where potentially hazardous materials are handled by workers.
Can a sink be used as a eyewash station?
Water hoses, sink faucets, or showers are not acceptable eyewash facilities. Eyewash stations must be plumbed for each eye, to provide lukewarm water. Regular maintenance of eyewash stations is required.
How does an eyewash station work?
The user must be able to operate an eyewash station with one hand and in a single motion in one second or less. Once activated, the water must stay on to allow the injured party to use their hands to hold their eyes open. The water should be “tepid” (defined as a temperature between 60°F–100°F).
What happens if you pull a safety shower?
Safety showers are designed to be simple to use. Once the lever has been pulled, the shower will discharge water at a specific rate and volume for at least 15 minutes, in line with the ANSI regulations. You should stay under the stream of water for at least 15 minutes to ensure thorough decontamination.
How long should you use an eyewash station?
15 minutes
Eyewash stations should be designed to deliver fluid to both eyes simultaneously at a volume of not less than 1.5 litres/minute (0.4 gallons/minute) for 15 minutes. The combination eye and face wash stations require 11.4 litres per minute (3.0 gallons per minute).
