How high does a stove pipe have to be over the roof?
The top of a chimney pipe must extend at least 2 feet above the peak of the roof, if the pipe is within 10 feet of the peak. If the pipe is farther than 10 feet from the roof peak, it must be 2 feet above the highest point of the roof within 10 feet.
Does a chimney need to be higher than the roof?
The most common of these being the 2 foot, 10 foot, 3-foot rule. Roughly this means that a chimney should be 3 feet higher than the point it passes through a roof, while also being at least 2 feet taller than any part of a building that’s within 10 feet of the chimney.
What is a chimney liner?
Also often referred to as a chimney liner, a flue liner is a flexible tube that is connected to your stove pipe to line the inside of your chimney. It runs up the entire length of your chimney, carrying the fumes up your flue liner instead of releasing them straight into your chimney cavity.
Can a wood burning stove be vented through the wall?
Venting is an important component of all stoves. And wood, gas, and pellet stoves have different venting systems. For instance, wood-burning stoves will always be vented through the roof of your house, but pellet-burning stoves can be vented vertically through the roof, or horizontally through the wall to the outdoors.
How far above the roof should a vent pipe be?
Unless a roof is to be used for any purpose other than weather protection, extensions of vent pipes through a roof should be terminated at least 12 inches above the roof. The vent should be extended at least seven feet above the roof if it is to be used for something other than weather protection.
Why does chimney have to be higher than the roof?
Because air pressure is lower at higher altitudes, and a taller column of rising air pulls harder on the air below it, increasing the height of a chimney generally strengthens draft. Traditionally constructed homes typically have at least 15 feet of vertical height between the firebox and the chimney opening.
