How do you use Zoop?

How do you use Zoop?

To get started:

1. Wake up the device by keeping any button pressed until the display turns on.
2. Keep DOWN pressed to enter General Settings.
3. Set time. See Time.
4. Set date. See Date.
5. Set units. See Units.
6. Press MODE to exit settings.

How do I change the time on my Suunto Zoop?

To set time:

1. While in time mode, keep DOWN pressed.
2. Press UP to scroll to Time and press SELECT.
3. Set hours with DOWN or UP and confirm with SELECT.
4. Repeat for minutes and seconds. Set the format with DOWN or UP and confirm with SELECT.
5. Press MODE to exit.

How long does Suunto Zoop battery last?

How long does the Zoop Novo battery last? Life expectancy for the battery depends on the number of dives you have per year. As a general rule, if you’re lucky enough to be diving around 300 times a year, the battery will last between around 8 to 12 months.

How do I turn off my Suunto Zoop?

Suunto Zoop Novo display turns off after 30 minutes of inactivity to save battery time. To turn the display back on, press any button.

Does Suunto Zoop do Nitrox?

The Suunto Zoop is a very easy-to-use computer for recreational divers. This computer has four different modes which are air, nitrox, free and gauge. As well as this, its decompression capabilities allow for safer and more enjoyable diving.

What is NDL diving?

The no decompression limit (NDL) is the maximum allowable dive time that you can remain at a specific depth and ascend directly to the surface without requiring staged decompression stops on the way up. Remember the higher the partial pressure of nitrogen (ppN2), the shorter the dive time (NDL).

How long should a dive computer battery last?

The average mid range dive computer without a fancy colour screen and an average diver doing maybe 50 dives a year might expect to have to replace their battery coming up towards the second year. More or less use will obviously affect the life but most manufacturers state a two year life.

How do you reset a Suunto dive computer?

The memory of a diving computer cannot unfortunately be reset as this is a circle memory. The diving computer will start automatically overwriting the oldest dives when the memory capacity is exceeded. The maximum depth in the history memory can be zeroed but this can be done only in the Dive Manager software.

How do you switch from air to Nitrox on Suunto Zoop?

Air: for diving with regular air. Nitrox: for diving using oxygen-enriched gas mixtures….To modify gas mix settings:

1. While in Nitrox mode, keep DOWN pressed.
2. Press SELECT to enter the Nitrox setting.
3. Adjust the O 2 value with DOWN or UP to match the oxygen percentage of your tank and confirm with SELECT.

How do I setup my Suunto Zoop Novo to Nitrox?

How to change the Nitrox setting:

1. Press the ‘mode’ button.
2. Press the ‘plan’ button until ‘set’ is displayed on the screen.
3. Press the ‘mode’ button.
4. To cycle through this menu, press ‘plan’ four times until ‘model’ is displayed on the screen.
5. Press the ‘mode’ button.
6. Press ‘plan’ until ‘nitrox’ is displayed on the screen.

Does Suunto Zoop have Gauge mode?

With Gauge mode, you can use Suunto Zoop Novo as a bottom timer. The timer in the center of the display shows dive time in minutes and seconds and activates at the start of the dive. The total running dive time, in minutes, is in the lower right corner.

How many modes does the Suunto Zoop have?

FUNCTIONS The Suunto ZOOP can be set to function as a regular air dive computer or as a nitrox dive computer. The ZOOP features two dive computer models (AIR, NITROX), three main operating modes (TIME/STAND-BY, SURFACE, DIVING), two menu based main modes (MEMORY, SET) and seven menu based submodes (review separate Quick Reference Guide).

Are Suunto dive computers en 250 / FIOH compliant?

Suunto dive computers are designed to comply with this standard. EN 250 / FIOH The tank pressure gauge and dive instrument parts used in measuring the tank pres- sure meet the requirements set in the section of the European Standard EN 250 that concern tank pressure measurements.

What mode should I Set my Zoop to?

Before Diving The ZOOP can be set for diving with standard air only (Air mode) or it can be set for diving with Enriched Air Nitrox (Nitrox mode). If you are educated for nitrox diving and you plan to make nitrox dives, it is recommended that you set the dive computer permanently to its NITROX Mode.

How deep does decompression take place in Suunto?

Suunto recommends that decompression takes place deeper than 4 m [13 ft], even if the indicated ceiling is shallower. Page 28 DISPLAY ABOVE THE FLOOR When you ascend above the floor, the ASC TIME CEILING display stops blinking and the upward pointing STOP ASC TIME arrow disappears (Fig. 3.16.). Decompression will now begin, but is very slow.