How do you mic a bass drum?
Place the mic 2 to 3 inches away from the inside head and a couple of inches off center. This is the standard way to mic a kick drum if you have the outside head off or if a hole is cut in it. This placement gives you a sharp attack from the beater hitting the head.
What mic should I use for bass drum?
Shure BETA 52A Dynamic If you are looking for a mic that is tailored specifically to pick up kick drum and bass instruments, this is definitely the one. It has a frequency response that is shaped in a way to enhance and be 100% compatible with bass instruments.
Is a condenser mic good for bass drum?
The basis of a good kick sound is a large dynamic microphone like the ATM250. We recommend that you position the mic inside the bass drum. This will capture the snap of the beat around the batter head while isolating the rest of the kit. Your best bet is a large diaphragm condenser microphone like an AT4047/SV.
How do you mic a bass drum without a hole in it?
You can do basically two things: 1: take front off (as suggested) and put the microphone in front of it. 2: place the microphone in the middle of the front skin about 1 to 3 inches away (make sure the mic is not touched when the drummer hits the kick drum) and then move it around until you get the sound you want.
What is the best microphone for a kick drum?
Ten of the Best Mics for Recording Kick Drums by The Press Desk
- Audio-Technica ATM250DE.
- Audix Microphones D6.
- Beyerdynamic M 88 TG.
- Electro-Voice RE320.
- Neumann U 47 FET.
- Royer Labs R-121.
- Sennheiser E602 II.
- Shure Beta 52A.
Can you use a vocal mic for bass drum?
Boundary Mics – Also known as PZMs (for Pressure Zone Microphones), boundary mics offer wide polar coverage and clean pickup of transients. Large-diaphragm Condensers – Your best vocal condenser probably sounds great on bass drums, too.
Should I cut holes in bass drum?
If you play a lot of shows, sound engineers appreciate having a hole for the bass drum mic. Without a hole, you’ll usually need a second mic on the batter bass drum head (although most engineers do this anyway), to capture the beater and to get more attack.
What mics are you using to mic drums?
– Shure SM57 – Extremely versatile microphone that works well for live drum snares and more. – Sennheiser e904 – This mic picks up a full sound from your snares. Works well on toms as well. – Audix D1 – They sound brighter than the Shure SM57’s retro kind of sound. But it adds the crisps to your snare sound.
What is the best mic for kick drum?
Audio Technica’s AE2500 is the ultimate kick drum mic, with a low cut filter at 80Hz and a design that was made to specifically and accurately capture the pounding thud that the instrument makes. In addition to being a dynamic mic, this device also can be switched over to having condenser capabilities.
What do you need to mic your drum set?
Set Everything Up. Before you place microphones on a drum set,you would need to set up everything correctly.
How many mic’s does a drum kit need?
At a minimum, you would need about six-eight pieces of microphones, including clips and mic stands, as well as cables, of course. Whether recording at home or for live performance, microphones for drum kits vary in size and models, with specialized microphones for the kicks and the toms.
